Integrator Amplifier

From Class Wiki
Revision as of 20:24, 17 January 2010 by Benjamin.henry (talk | contribs)
Jump to navigation Jump to search

Amplifiers

Integrator

Graph of a typical Integrator Amp circuit (drawing redrawn by Ben Henry)

The circuit at right integrates the input voltage by using an amplifier.

" ; Provides negative feedback for low output impedance needs. But it also distorts the output."<ref>Quick Study "Electronics 1, Part 2"</ref>

The use of an integrator circuit is the opposite of a differentiator circuit. In other words, If you have a triangle wave input and you differentiate it you will get a square wave output. If you run the square wave as the input to an integrator circuit you will end up with the triangle wave for the output<ref>Scherz, P: Practical Electronics for Inventors 2nd ed, page 545. </ref>. The resistor () is used to provide feedback<ref>Feedback_in_Amplifiers</ref>. of the output DC voltage. Without this, circuit wouldn't perform as calculated because of the un-ideal conditions of real life.

Contributers

--Benjamin.henry 23:15, 10 January 2010 (UTC)

Reviewers

Greg Fong

Victor Shepherd

  • I agree with Greg just like you did with square sine wave do the same with triangle wave instead of ^^^, makes it confusing and I don't believe that's a standard way of representing it.
  • I will add one more thing. You don't need to have the types of waves within "".

Sources

<references/>