Basic Op Amp circuits: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
=Buffer Amplifier= |
==Buffer Amplifier== |
||
[[Image:BufferAmplifier.PNG|thumb|300px|Buffer Amplifier ]] |
[[Image:BufferAmplifier.PNG|thumb|300px|Buffer Amplifier ]] |
||
*Used to transfer voltage but not current to the following circuit. This amplifier can be used to negate the loading effects. No current flows through the amplifier, thus there is no voltage drop through the input resistor (going to the buffer amplifier). |
*Used to transfer voltage but not current to the following circuit. This amplifier can be used to negate the loading effects. No current flows through the amplifier, thus there is no voltage drop through the input resistor (going to the buffer amplifier). |
||
=Inverting Amplifier= |
==Inverting Amplifier== |
||
[[Image:InvertingAmplifier.png|thumb|300px|Inverting Amplifier]] |
[[Image:InvertingAmplifier.png|thumb|300px|Inverting Amplifier]] |
||
*Uses negative feedback to invert and amplify voltage. Using nodal analysis at the negative terminal, the gain is found to be <math>-\frac{R_2}{R_1}</math> |
*Uses negative feedback to invert and amplify voltage. Using nodal analysis at the negative terminal, the gain is found to be <math>-\frac{R_2}{R_1}</math> |
||
=Summing Amplifier= |
==Summing Amplifier== |
||
[[Image:Summing_Amplifier.PNG|thumb|300px|Summing Amplifier]] |
[[Image:Summing_Amplifier.PNG|thumb|300px|Summing Amplifier]] |
||
*<math>V_o=-R_f \left( \frac{V_3}{R_3}+\frac{V_2}{R_2}+\frac{V_1}{R_1}\right)</math> |
*<math>V_o=-R_f \left( \frac{V_3}{R_3}+\frac{V_2}{R_2}+\frac{V_1}{R_1}\right)</math> |
||
*If all resistances are equal, then the output voltage is the (negative) sum of the input voltages |
*If all resistances are equal, then the output voltage is the (negative) sum of the input voltages |
||
=Noninverting Amplifier= |
==Noninverting Amplifier== |
||
[[Image:Noninverting_Amplifier.PNG|thumb|300px| |
[[Image:Noninverting_Amplifier.PNG|thumb|300px|Noninverting Amplifier]] |
||
*<math>V_o=V_{in} \left(1+\frac{R_2}{R_1}\right)</math> |
*<math>V_o=V_{in} \left(1+\frac{R_2}{R_1}\right)</math> |
||
==Differential Amplifier== |
|||
[[Image:Differential_Amplifier_2.PNG|thumb|300px|Differential Amplifier ]] |
|||
* |
|||
Revision as of 13:07, 11 January 2010
Buffer Amplifier
- Used to transfer voltage but not current to the following circuit. This amplifier can be used to negate the loading effects. No current flows through the amplifier, thus there is no voltage drop through the input resistor (going to the buffer amplifier).
Inverting Amplifier
- Uses negative feedback to invert and amplify voltage. Using nodal analysis at the negative terminal, the gain is found to be
Summing Amplifier
- If all resistances are equal, then the output voltage is the (negative) sum of the input voltages
