Chapter 4 problems: Difference between revisions
Jump to navigation
Jump to search
(→4.20) |
(→4.20) |
||
| Line 1: | Line 1: | ||
===4.20=== |
===4.20=== |
||
*We want to establish a DC operating point for the BJT. Writing a loop equation gives us -V<sub>BB</sub>-V<sub>in</sub>(t)+i<sub>B</sub>R<sub>B</sub>+v<sub>BE</sub>=0. To form a load line, we will let v<sub>in</sub>(t)=0 & i<sub>B</sub>=0. |
*We want to establish a DC operating point for the BJT. Writing a loop equation gives us -V<sub>BB</sub>-V<sub>in</sub>(t)+i<sub>B</sub>R<sub>B</sub>+v<sub>BE</sub>=0. To form a load line, we will let v<sub>in</sub>(t)=0 & i<sub>B</sub>=0. Thus v<sub>BE</sub>=V<sub>BB</sub>+v<sub>in</sub>(t) and i<sub>B</sub>(t)=(V<sub>BB</sub>+v<sub>in</sub>(t))/R<sub>B</sub> |
||
:*<math>V_in=-0.2, 0, 0.2</math> for the minimum, Q-point and maximum values. |
|||
:* |
|||
===4.34=== |
===4.34=== |
||
Revision as of 09:41, 5 March 2010
4.20
- We want to establish a DC operating point for the BJT. Writing a loop equation gives us -VBB-Vin(t)+iBRB+vBE=0. To form a load line, we will let vin(t)=0 & iB=0. Thus vBE=VBB+vin(t) and iB(t)=(VBB+vin(t))/RB
- for the minimum, Q-point and maximum values.
