Laplace transforms: Critically Damped Motion: Difference between revisions

From Class Wiki
Jump to navigation Jump to search
Line 118: Line 118:




Error Checked By:
Error Checked By: Greg Peterson

Revision as of 00:58, 23 October 2009

Using the Laplace Transform to solve a spring mass system that is critically damped

Problem Statement

An 8 pound weight is attached to a spring with a spring constant k of 4 lb/ft. The spring is stretched 2 ft and rests at its equilibrium position. It is then released from rest with an initial upward velocity of 3 ft/s. The system contains a damping force of 2 times the initial velocity.

Solution

Things we know

m=832=14slugs

k=4

Damping constant C=2

x(0)=0

x˙(0)=3

Standard equation:  md2xdt2+Cdxdt+khx=0


Solving the problem

Therefore the equation representing this system is.

14d2xdt2=4x2dxdt

Now we put the equation in standard form

d2xdt2+8dxdt+16x=0


Now that we have the equation written in standard form we need to send it through the Laplace Transform.

[d2xdt2+8dxdt+16x]

And we get the equation (after some substitution and simplification).

s2X(s)+8sX(s)+16X(s)=3

X(s)(s2+8s+16)=3


X(s)=3(s+4)2

Now that we have completed the Laplace Transform and solved for X(s) we must so an inverse Laplace Transform. 

1[3(s+4)2]

and we get

x(t)=3te4t

So there you have it the equation of a Critically Damped spring mass system.

Apply the Initial and Final Value Theorems to find the initial and final values

Initial Value Theorem
limssF(s)=f(0)
Final Value Theorem
lims0sF(s)=f()


Applying this to our problem

The Initial Value Theorem

limssX(s)=3(s+4)2

limssX(s)=3(+4)2=0


So as you can see the value for the initial position will be 0. 

Which makes sense because the system is initially in equilibrium. 

The Final Value Theorem

lims0sX(s)=3(s+4)2


lims0sX(s)=3(0+4)2=316

This shows the final value to be 316ft

Which appears to mean the system will be below equilibrium after a long time. 


Bode Plot of the transfer function

Transfer Function

X(s)=3(s+4)2


Bode Plot

This plot is done using the control toolbox in MatLab. 

Error creating thumbnail: File missing
Fig (1)



Written By: Mark Bernet


Error Checked By: Greg Peterson