Chapter 1: Difference between revisions

From Class Wiki
Jump to navigation Jump to search
Fonggr (talk | contribs)
Fonggr (talk | contribs)
Line 49: Line 49:
=Differential Amplifiers=
=Differential Amplifiers=
*Differential amplifiers take two (or more) input sources that produce an output voltage proportional to the difference between the input voltages. <math>V_o=A_d(v_{i1}-v_{i2})\,</math>, where <math>A_d\,</math> is the differential gain
*Differential amplifiers take two (or more) input sources that produce an output voltage proportional to the difference between the input voltages. <math>V_o=A_d(v_{i1}-v_{i2})\,</math>, where <math>A_d\,</math> is the differential gain
*Differential input signal is the difference between the input voltages. <math>v_{id}=v_{i1}-v_{i2}\,</math>
*Instead of expressing the input voltages in terms of <math>v_{i1}\,</math> and <math>v_{i2}\,</math>, we can express it in terms of the differential and common-mode input
*Common-mode input signal is the average of the input voltages. <math>v_{icm}=\frac{1}{2}(v_{i1}+v_{i2})</math>
**Differential input signal is the difference between the input voltages. <math>v_{id}=v_{i1}-v_{i2}\,</math>
**Common-mode input signal is the average of the input voltages. <math>v_{icm}=\frac{1}{2}(v_{i1}+v_{i2})</math>


=Definitions=
=Definitions=

Revision as of 16:26, 8 January 2010

Amplifier Models

  • These are purely models, and cannot be replicated in a real world environment. They are meant to explain.
  • Trans stands for transfer - from voltage to current or visa versa.
  • The inputs and outputs can be either current or voltage. This leads to 4 amplifier models.
  • You can use any of these models, though some may be easier to work with (if you are given the Thevenin or Norton equivalent)


Amplifier models
Amplifier type
Gain parameter
Gain equation
Voltage input Current input
Voltage output Voltage
Open-circuit voltage gain
Avoc=voocvi
Transresistance
Open-circuit transresistance gain
Rmoc=voocii
Current output Transconductance
Short-circuit transconductance gain
Gmsc=ioscvi
Current
Short-circuit current gain
Aisc=ioscii


Characteristics of ideal amplifiers
Amplifier
Type
Input
Impedance
Output
Impedance
Gain
Parameter
Voltage 0 Avoc
Current 0 Aisc
Transconductance Gmsc
Transresistance 0 0 Rmoc

Differential Amplifiers

  • Differential amplifiers take two (or more) input sources that produce an output voltage proportional to the difference between the input voltages. Vo=Ad(vi1vi2), where Ad is the differential gain
  • Instead of expressing the input voltages in terms of vi1 and vi2, we can express it in terms of the differential and common-mode input
    • Differential input signal is the difference between the input voltages. vid=vi1vi2
    • Common-mode input signal is the average of the input voltages. vicm=12(vi1+vi2)

Definitions

  • Input Resistance: Ri of an amplifier is the equivalent resistance seen when looking into the input terminals
  • Output Resistance:Ro is the Thevenin resistance seen when looking back into the output terminals of an amplifier
  • Open-circuit voltage gain: the ratio of output amplitude to input amplitude with the output terminals open circuited
  • Short-circuit current gain: the current gain with the output terminals of the amplifier short circuited

Bag of Tricks

  • Buffer amplifier
  • Inverting amplifier