Using the Laplace Transform to solve a spring mass system that is critically damped
Problem Statement
An 8 pound weight is attached to a spring with a spring constant k of 4 lb/ft.
The spring is stretched 2 ft and rests at its equilibrium position.
It is then released from rest with an initial upward velocity of 3 ft/s.
The system contains a damping force of 2 times the initial velocity.
Solution
Things we know
m = 8 3 2 = 1 4 s l u g s
k=4
Damping constant C=2
x(0)=0
x ˙ ( 0 ) = − 3
Standard equation:
m d 2 x d t 2 + C d x d t + k h x = 0
Solving the problem
Therefore the equation representing this system is.
1 4 d 2 x d t 2 = − 4 x − 2 d x d t
Now we put the equation in standard form
d 2 x d t 2 + 8 d x d t + 1 6 x = 0
Now that we have the equation written in standard form we need to send
it through the Laplace Transform.
ℒ [ d 2 x d t 2 + 8 d x d t + 1 6 x ]
And we get the equation (after some substitution and simplification) .
s 2 X ( s ) + 8 s X ( s ) + 1 6 X ( s ) = − 3
X ( s ) ( s 2 + 8 s + 1 6 ) = − 3
X ( s ) = − 3 ( s + 4 ) 2
Now that we have completed the Laplace Transform
and solved for X(s) we must so an inverse Laplace Transform.
ℒ − 1 [ − 3 ( s + 4 ) 2 ]
and we get
x ( t ) = − 3 t e − 4 t
So there you have it the equation of a Critically Damped spring mass system.
Apply the Initial and Final Value Theorems to find the initial and final values
Initial Value Theorem
lim s → ∞ s F ( s ) = f ( 0 )
Final Value Theorem
lim s → 0 s F ( s ) = f ( ∞ )
Applying this to our problem
The Initial Value Theorem
lim s → ∞ s X ( s ) = − 3 ( s + 4 ) 2
lim s → ∞ s X ( s ) = − 3 ( ∞ + 4 ) 2 = 0
So as you can see the value for the initial position will be 0.
Which makes sense because the system is initially in equilibrium.
The Final Value Theorem
lim s → 0 s X ( s ) = − 3 ( s + 4 ) 2
lim s → 0 s X ( s ) = − 3 ( 0 + 4 ) 2 = − 3 1 6
This shows the final value to be
− 3 1 6 f t
Which appears to mean the system will be below equilibrium after a long time.
Bode Plot of the transfer function
Transfer Function
X ( s ) = − 3 ( s + 4 ) 2
Bode Plot
This plot is done using the control toolbox in MatLab.
Error creating thumbnail: File missing Fig (1) ;
Break Points and Asymptotes
A break point is defined by a place in the bode plot where a change occurs.
To find your break points you must start with a transfer function.
Written By: Mark Bernet
Error Checked By: Greg Peterson