ASN9 - 3rd Harmonic & QSD

Back to my home page

Describe how third harmonic sampling and QSD (Quadrature Sampling Detector works.

For this assignment I will look third harmonic sampling and QSD as used by SoftRock-40 software defined radio. For SoftRock they needed a high frequency oscillator to provide the necessary signal to mix with the signal coming from the antenna. The reason this oscillation needed to be so high was due to there design which used one oscillator to create both the sin and cos waveform for there mixer. To do this they needed a oscillator with a frequency four times higher than the frequency they wished to sample. Getting an oscillator at these speeds is both difficult and expensive so they came up with a clever way to use the third harmonic form their oscillator to achieve the frequency necessary.

It is known by using Fourier Series a square wave can be made up of a series of cos wave i.e. $\sum _{n=1}^{\infty }{\frac {1}{n}}cos(n\omega t)$.

SoftRock decided that they could use the 3rd harmonic of this i.e ${\frac {1}{3}}cos(3\omega t$ to get the required oscillation without the hassle and cost of using a high frequency oscillator. Stated another way they need an oscillator that has a frequency three time slower than the one originally needed. The disadvantage to this is that the signal strength is a third smaller or around a 9.5 dB loss.