Please put your name next to the assignment, linking it to your submission
Please put your name next to the assignment, linking it to your submission
* HW #1 - Make a personal page on this wiki ([[Christopher Garrison Lau I|Chris Lau]])([[Jodi S. Hodge]])([[user:chris.wills|Chris Wills]])
* HW #1 - Make a personal page on this wiki ([[Christopher Garrison Lau I|Chris Lau]])([[Jodi S. Hodge]])([[user:chris.wills|Chris Wills]])[[Shepherd,Victor|(Victor Shepherd)]]
* HW #2 - Write a tutorial about installing and/or using Octave ([[Installing Octave on a Mac|Chris Lau]])([[Jodi S. Hodge]])([[Octave|Victor Shepherd]])
* HW #2 - Write a tutorial about installing and/or using Octave ([[Installing Octave on a Mac|Chris Lau]])([[Jodi S. Hodge]])([[Octave|Victor Shepherd]])
* HW #3 - Show graphically that <math> \int_{-\infty}^{\infty} e^{j2\pi f(t-u)}\, df = \delta (t-u)</math> ([[HW 3|Chris Lau]])([[Jodi S. Hodge]])([[user:chris.wills/HW3|Chris Wills]])([[Hw3|Victor Shepherd)]]
* HW #3 - Show graphically that <math> \int_{-\infty}^{\infty} e^{j2\pi f(t-u)}\, df = \delta (t-u)</math> ([[HW 3|Chris Lau]])([[Jodi S. Hodge]])([[user:chris.wills/HW3|Chris Wills]])([[Hw3|Victor Shepherd)]]
HW #6 - Pick a property of the Fourier Transform & present it on the Wiki. Make a table with all your properties. Interpret your property. (Ben Henry)(Chris Lau)(Victor Shepherd)
HW #9 - Add to #8 writeup how to do a decimating filter and figure out how many multiply & adds are needed for a n/2 decimating low pass filter.(Jodi S. Hodge)(Chris Lau)(Victor Shepherd)
HW #10 - Use Octave (or Mathlab or Silab) to plot the frequency response of low pass filters with cut off frequencies of 1/32T, 1/8T, and 1/4T and compare how many coeffficients are needed with an eye to answer the question "Is it less calculation to decimate and then filter, or better to put the filter in the pre-decimation filter?" (Jodi S. Hodge)(Victor Shepherd)
HW #11 - Is our method the same as Mark Fowler's? See
HW #12 - Experiment with a variety of signals having a 3Khz bandwidth to determine the resolution you can get when doing a cross correlation . You can generate the signals randomly and filter them to obtain the band-limited signals. (Jodi S. Hodge)
HW #13 - Derive the following realtions:
a)
b)
c)
HW #14 - Come up with a use for an adaptiveFIR filter and make an Octave script to demonstrate it. (Jodi S. Hodge)